Daystate MK3 depo

[robi51]

Buon giorno a tutti.
In un modo che non ricordo com'è accaduto, deve essersi starata la programmazione, in quanto, all'improvviso, non spara più.
Girando in rete ho capito che dovrebbe esserci il modo per resettarla, ma non sono in grado di capire come.
Gentilmente chiedevo se qualcuno è in grado di darmi suggerimenti in merito.
Ringrazio anticipatamente per quanto.
Saluti
Roberto

[gilarmar]

Questa è la procedura


MK3 & Air Wolf - Resetting to defaults

The programming mode is entered by ensuring the gun is unloaded, in the safe position, pointing the muzzle in a safe direction (down) and pulling the trigger, then switch the safety catch to FIRE. The gun will then beep and flash indicating that the gun is in program mode. If the trigger is kept pulled, the gun will cycle through its programming mode and will beep and flash the appropriate amount of times, indicating the mode it is in.

Default Setting

The user can set the gun to a default condition to switch off all the features.
Default programming

Ensure that the gun is unloaded and the safety switch is in the SAFE position
Pull the trigger while plugging the charging lead in and the yellow/red charging light will be illuminated
Keep trigger pulled until 7 beeps are heard
Defaults have been restored:
Magazine counter off
Magazine counter set to zero
Shot counter off
Shot count set to zero
Safety LED normally on
Power set to maximum